Steel Internal Sliding Doors

Keep your home light and airy with Steel Sliding Doors

The architects for a residential refurbishment in London NW8 (Dols Wong Architects) had the great idea of using a combination of black steel sliding doors and partitions. The steel was used to divide large open spaces and create additional rooms whilst ensuring that the home had as much natural light running through it as possible.

Original Steel Sliding Door and Partition Design Plus London 4

The W20 steel profile is mainly designed for hinged doors, fixed light and windows (Side Hung, Top hung and Centre pivot windows). However, it was not designed to be used as a sliding door. This means that every steel sliding doors we make is a fully bespoke product. We customise the steel profile to accommodate sliding door gear and we select robust fixings that can take the weight of a steel door and glazing.

It is all in the detail

On visiting the property it is clear that thought and time was put into the design of the home. The steel partition returns 90 degrees and creates a great looking divide between the hallway and the study. Apart from being a beautiful design feature, this corner allows for light to flood the study from both the front and rear of the house. This results in a bright ground floor and a great sense of space.

Original Steel sliding doors pocket doors DesignPlus
Original Steel Sliding Pocket Door and Partition NW8 Design Plus London


All our partitions come with 6mm tempered safety glass as standard.
Frames powder coated to RAL 7016 (anthracite grey)
Sliding door sizes: 1200 W x 2250 H and 1550 W x 2150 H (mm)
Handles: Flush pull handles colour matched to frames
50 x 50mm steel corner post colour matched to frames

For more information on Black Steel Sliding Doors give us a ring at the office. 0207 602 1087, our email us at

As a final note, we must give credit to the main contractor on this project, Eddy. This site has to be the most accurate site in terms of dimensions across the whole property. When it came time to take site measurements, Eddy had openings prepared to within 1 (maybe 2mm MAXIMUM) over a span of 5-6 metres. WOW!

Visit us at Design Plus London.

2 thoughts on “Steel Internal Sliding Doors”

  1. We are looking to install Crittall style tri-sliding internal doors between an open plan eat-in kitchen and lounge, so we can partition the space off when needed but without compromising the light and open plan feel.

    Please could you let us know if you are able to produce and install these type of doors in anthracite grey (RAL code 7016) to match external bifold and triple track doors. The wall-to-wall width of the space is 2420mm wide x 2300mm high.

    Thank you, Rachel
    07837 180515

Leave a Reply

Your email address will not be published. Required fields are marked *